Bio-Oil Production from Liquid-Phase Pyrolysis of Giant Leucaena Wood
Date
2016
ISBN
Journal Title
Journal ISSN
Volume Title
Resource Type
Article
Publisher
Springer Science and Business Media, LLC
Journal Title
Bio-Oil Production from Liquid-Phase Pyrolysis of Giant Leucaena Wood
Recommended by
Abstract
Bio-oil production from giant leucaena wood was performed by liquid-phase pyrolysis in the presence of decane as the solvent. Three different types of catalyst (ZSM-5, NiMo/Al2O3 and Pt/Al2O3) were evaluated in terms of the bio-oil production yield and quality in an autoclave reactor at a reaction temperature of 350�C and initial hydrogen (H2) pressure of 1 MPa with decane as the solvent. Although the yield was not significantly affected by the catalyst type, CHN analysis revealed that the NiMo/Al2O3 catalysts yielded bio-oil with the lowest oxygen content (10.0 wt. %) in 4.30 wt. % yield so that it was selected as the optimal catalyst. Optimization of the reaction temperature (at 250, 300, 350, and 400�C) and the initial H2 pressure (at 0.5, 1, 2, and 3 MPa) by sequential univariate analysis revealed that the reaction temperature had the greatest influence on the oil yield and oxygen content, reaching a yield of 8.60 wt. % with the lowest oxygen content of 8.50 % at 400�C. Increasing the initial H2 pressure diminished only slightly the oil and char yield and decreased the gas yield. � 2016, Springer Science+Business Media New York.
Description
Keywords
Citation
Chemistry and Technology of Fuels and Oils